https://www.e-solare.com/produse/tristar
The Tristar TS-45 and TS-60 diversion charge controllers are the workhorses of the renewable energy market with many years of service in systems worldwide.
In diversion mode, the controller is connected to your battery bank and also the dump load. It operates as an overflow controller for your battery bank – bleeding excess energy to the dump load when the batteries are full. This means that the turbine is always running – and not being switched on and off as is the case with other charge control methods. It also means that your batteries are never cycled through on / off charging techniques and this will prolong the life of your expensive battery bank.
The TS-45 and TS-60 use pulse width modulation (PWM) to send the exact right amount of excess energy to the dump load at any time.
TECHNICAL SPECIFICATION
TS-45 |
TS-60 |
|
Maximum Battery Current 45 amps 60 amps |
45A |
60A |
Maximum Solar Input @ 12V |
600W |
800W |
Maximum Solar Input @ 24V |
1200W |
1600W |
Maximum Solar Input @ 48V |
2400W |
3200W |
Nominal System Voltage |
12, 24, 36, 48V DC |
|
Max. Solar Open Circuit Voltage |
125V DC |
|
Minimum Battery Operating Voltage |
9V DC |
|
Maximum Self-consumption |
<20mA |
|
Transient Surge Protection |
4500W/port |
|
Dimensions |
26.0 x 12.7 x 7.1 cm |
|
Weight |
1.6kg |
|
Max. Wire Size |
35 mm² / 2 AWG |
|
Conduit knockouts |
Eccentric 2.5/3.2cm (1.0/1.25 inch) |
|
Enclosure |
Type 1 (indoor and vented) IP20 |
|
Ambient Temperature |
–40°C to +60°C |
|
Storage Temperature |
–55°C to +100°C |
|
Humidity |
100% non-condensing |
Clip de prezentare: Vizualizare